€239.00*
Inductance is a critical behavioral feature of a cable, causing resistance to the signal flow, rising with the frequency. Multicore architectures, such as that of the LS-40, reduce this effect and bring more precision and punch to the sound.
The conductors of the LS-40 are made of high-purity copper. Under normal conditions, copper is the next-best electrical conductor after silver. Compared to cheap CCA (Copper Coated Aluminum) in particular, copper has a significantly better conductivity and is also mechanically more resilient.
The stranded wire design is a tried and tested conductor design in the hi-fi sector. Each conductor consists of 50 x 0.25 mm strands that are "twisted" together. The advantage of this design lies in the economical method of production and the mechanical flexibility, which increases with smaller diameters of the individual wires.
The conductor cross-section of 2x5.0 mm² is the foundation for a dynamic and powerful sound. The polyethylene (PE) insulation of the LS-40 has very good electrical properties. Compared to PVC, it halves the annoying battery-like capacitance of cables. The reproduction gains in brilliance and spatial quality.
The PE network jacket protects against mechanical damage and serves as additional insulation.
Application: | HiFi speaker cable |
---|---|
Cable diameter: | 9 mm |
Conductor cross-section: | 2 x 5 mm² (4 x 2.5 mm²) |
Conductor design: | 50 x 0.25 mm (2.5 mm²) |
Conductor material: | High-purity copper |
Conformity: | CE, REACH, RoHS |
Connection type: | SBW, SW |
Design: | 4-fold multicore |
Dielectric: | PE |
Jacket: | PE network jacket |
Length: | 2 x 3 m, By the meter |
Product group: | Loudspeaker cables |
Product category: | Exzellenz speaker cables |
Quality: | Exzellenz |
Technology: | Multicore |
Connector: | Easy Plug |
Made in Germany: | Yes |
- Exzellenz LS-40 2 x 3.0 m | Easy Plug
- Exzellenz LS-40 | Per meter (optional)
Inductance is a critical behavioral feature of a cable, causing resistance to the signal flow, rising with the frequency. Multicore architectures, such as that of the LS-40, reduce this effect and bring more precision and punch to the sound.
The conductors of the LS-40 are made of high-purity copper. Under normal conditions, copper is the next-best electrical conductor after silver. Compared to cheap CCA (Copper Coated Aluminum) in particular, copper has a significantly better conductivity and is also mechanically more resilient.
The stranded wire design is a tried and tested conductor design in the hi-fi sector. Each conductor consists of 50 x 0.25 mm strands that are "twisted" together. The advantage of this design lies in the economical method of production and the mechanical flexibility, which increases with smaller diameters of the individual wires.
The conductor cross-section of 2x5.0 mm² is the foundation for a dynamic and powerful sound. The polyethylene (PE) insulation of the LS-40 has very good electrical properties. Compared to PVC, it halves the annoying battery-like capacitance of cables. The reproduction gains in brilliance and spatial quality.
The PE network jacket protects against mechanical damage and serves as additional insulation.
The LS-104 is an excellent entry-level model to the Micro AIR series. It already stands out clearly from standard cables and demonstrates the acoustic potential of this technology. Sensitive amplifiers in particular harmonize excellently with this cable. The Referenz LS-104 Micro AIR provides an open and relaxed sound. It is also available with BFA bananas or spade lugs and as an Easy Plug version.
The conductors of the LS-20 are made of high-purity copper. Under normal conditions, copper is the next-best electrical conductor after silver. Compared to cheap CCA (Copper Coated Aluminum) in particular, copper has a significantly better conductivity and is also mechanically more resilient.
The stranded wire design is a tried and tested conductor design in the hi-fi sector. Each conductor consists of 50 x 0.25 mm strands that are "twisted" together. The advantage of this design lies in the economical production and the mechanical flexibility, which increases with smaller diameters of the individual wires.
The conductor cross-section of 2x2.5 mm² forms the foundation for a dynamic and powerful sound. The polyethylene (PE) insulation of the LS-40 has very good electrical properties. Compared to PVC, it halves the annoying battery-like capacitance of cables. The reproduction gains in brilliance and spatial quality. The PE network jacket protects against mechanical damage and serves as additional insulation.
Like the flagship model, the LS-204 is also based on Micro Air technology. The difference lies in the multicore architecture. Compared to the XL version, the LS-204 has four instead of six Concentric Copper conductors. This cable boasts an agile character and was primarily developed for slim floorstanding speakers with smaller bass drivers. The Referenz LS-204 Micro AIR is available as a single-wire version with BFA bananas or spade lugs, or as an Easy Plug version.
The new Referenz Micro AIR series is a further installment in the success story of the Micro AIR technology: As with the already legendary AIR Helix cables, air is also a central component of the insulation concept in the new Referenz Micro AIR technology. Due to the low speaker impedances, however, low line resistances and a low inductance are also very important for speaker cables. For this reason, the Referenz LS-204 XL Micro AIR uses a total of 6 concentric copper conductors in addition to the air dielectric. Thanks to this multicore architecture, the magnetic fields of the positive and negative conductors overlap and neutralize each other. This significantly reduces the inductance of the cable, which guarantees unaltered transmission of the audio signal over a broad frequency spectrum. Due to our approach, the LS-204 XL has a balanced sound character with precise timing, on top of a solidly controlled foundation. This cable is primarily designed for full-size floorstanding speakers. Sound, of course, is always subjective and depends not least on the overall constellation of a hi-fi system. In the end, the decisive factor is your own personal listening impression.
The LS-404 Micro AIR is a further installment in the success story of the Micro AIR technology: As with the already legendary AIR Helix cables, air is also a central component of the insulation concept in the Referenz Micro AIR technology. Due to the low speaker impedances, however, low line resistances and a low inductance are also very important for speaker cables. For this reason, the Referenz LS-404 Micro AIR uses a total of 8 concentric copper conductors in addition to the air dielectric. Thanks to this multicore architecture, the magnetic fields of the positive and negative conductors overlap and neutralize each other. This significantly reduces the inductance of the cable, which guarantees unaltered transmission of the audio signal over a broad frequency spectrum. Due to our approach, the LS-404 has an extremely balanced sound character with precise timing, on top of a solidly controlled foundation. This cable is primarily designed for full-size floorstanding loudspeakers. The impression sound makes on the listener is always subjective, of course, and depends in no small part on the overall constellation of a hi-fi system. In the end, the decisive factor is your own personal listening impression.
€239.00*
€578.99*
€209.00*
€749.00*
€899.00*
€998.99*
Login