High-quality speaker cable | Optimized for high frequenciesQuality: PremiumS/Z stranding | Silver-plated
Under normal conditions, copper is the next-best electrical conductor after silver. Compared to cheap CCA (Copper Coated Aluminum) in particular, copper has a significantly better conductivity and is also mechanically more resilient.
Finishing the conductor surface of the Premium Silver speaker cable with a silver coating improves the high-frequency reproduction of your hi-fi system.The stranded wire is a tried-and-tested conductor design. In the Premium LS-SILBER silver speaker cable, the strands consist of 30 x 0.25 mm (1.5 mm²), 50 x 0.25 (2.5 mm²), 84 x 0.30 mm (4.0 mm²) wires "twisted" together. The advantage of this design lies in the mechanical flexibility, which increases with smaller diameters of the individual wires.
For cost reasons, many loudspeaker cables use the same stranded wire with the same stranding direction for both the positive and negative conductors.
However, these cables are not easy to lay and tend to get tangled due to the torsional forces acting on the strands in the same direction.
This can be remedied by using stranded wires with different stranding directions for the positive and negative conductors. The opposing torsional forces cancel each other out and the cable can be laid more easily and smoothly.
Under normal conditions, copper is the next-best electrical conductor after silver. Compared to cheap CCA (Copper Coated Aluminum) in particular, copper has a significantly better conductivity and is also mechanically more resilient. The wires of the Premium LS-CU speaker cable are made of particularly high-purity copper. A conductor cross-section of up to 4 mm² provides the basis for a powerful and dynamic sound.
Stranded wire is a tried-and-tested conductor design. In the Premium LS-CU speaker cable, the strands consist of 30 x 0.25 mm (1.5 mm²), 50 x 0.25 (2.5 mm²), 84 x 0.30 mm (4.0 mm²) wires "braided" together. The advantage of this design lies in the mechanical flexibility, which increases with smaller diameters of the individual wires. For cost reasons, many loudspeaker cables use the same stranded wire with the same stranding direction for both the positive and negative conductors. However, these cables are not easy to lay and tend to get tangled due to the torsional forces acting on the strands in the same direction. This can be remedied by using stranded wires with different stranding directions for the positive and negative conductors. The opposing torsional forces cancel each other out and the cable can be laid more easily and smoothly.
Under normal conditions, copper is the next-best electrical conductor after silver. Compared to cheap CCA (Copper Coated Aluminum) in particular, copper has a significantly better conductivity and is also mechanically more resilient. The wires of the Premium LS-CU speaker cable are made of particularly high-purity copper. A conductor cross-section of up to 4 mm² provides the basis for a powerful and dynamic sound.
Stranded wire is a tried-and-tested conductor design. In the Premium LS-CU speaker cable, the strands consist of 30 x 0.25 mm (1.5 mm²), 50 x 0.25 (2.5 mm²), 84 x 0.30 mm (4.0 mm²) wires "braided" together. The advantage of this design lies in the mechanical flexibility, which increases with smaller diameters of the individual wires. For cost reasons, many loudspeaker cables use the same stranded wire with the same stranding direction for both the positive and negative conductors. However, these cables are not easy to lay and tend to get tangled due to the torsional forces acting on the strands in the same direction. This can be remedied by using stranded wires with different stranding directions for the positive and negative conductors. The opposing torsional forces cancel each other out and the cable can be laid more easily and smoothly.
This flat speaker cable with very fine, braided (not stranded) wires is extremely compact and flexible. It is ideal for laying under carpets or behind skirting boards. Ideally suited for home theater systems.
High-quality speaker cableQuality: PremiumClass E flame-retardant cable
Special, flame-retardant class E speaker cable. Very flexible and easy to lay thanks to stranded cores. The sheathing is easy to remove and the wires are clearly marked in black and red, which simplifies installation. Use of sturdy 0.25 mm thick copper wires also makes connections easier.
Under normal conditions, copper is the next-best electrical conductor after silver. Compared to cheap CCA (Copper Coated Aluminum) in particular, copper has a significantly better conductivity and is also mechanically more resilient. The wires of the Premium LS-CU speaker cable are made of particularly high-purity copper. A conductor cross-section of up to 4 mm² provides the basis for a powerful and dynamic sound.
Stranded wire is a tried-and-tested conductor design. In the Premium LS-CU, the strands consist of 84 x 0.30 mm (4.0 mm²) wires "braided" together. The advantage of this design lies in the mechanical flexibility, which increases with smaller diameters of the individual wires. For cost reasons, many loudspeaker cables use the same stranded wire with the same stranding direction for both the positive and negative conductors. However, these cables are not easy to lay and tend to get tangled due to the torsional forces acting on the strands in the same direction. This can be remedied by using stranded wires with different stranding directions for the positive and negative conductors. The opposing torsional forces cancel each other out and the cable can be laid more easily and smoothly.