Product information "AmbienTone No.4"

The flat membrane loudspeakers are part of a modified plasterboard panel. They can be installed in plasterboard walls, in just a few simple steps. Once connected, inserted and filled, AmbienTone speakers can be easily wallpapered over, painted over and even plastered over. A covering layer of up to 2 mm results in virtually no loss of sound quality.

Beam angle: H x V 180° x 180°
Carrier: 12.5 mm plasterboard
Connection cable: 10 m
Frequency range: 80 - 18,000 Hz
Impedance: 6 ohms
Load capacity: 60 watts
Prinzip: 2-Wege-System
Sensitivity: 92.5 dB/W/m
Dimensions: 625 x 500 x 44 mm
Weight: Approx. 5.5 kg
Product group: AmbienTech
Product category: Cable duct
Made in Germany: Yes
  • 1 x AmbienTone No. 4
  • 10 m speaker cable
  • Installation instructions

0 of 0 reviews

Leave a review!

Share your experiences with others.


You might also be interested in this:

AmbienTone No.2
"Invisible" speaker
The AmbienTone No. 2 universal modules can be invisibly inserted into panel materials such as MDF wood or chipboard. Panel material (such as parts of a media wall or parts of wall or ceiling paneling) are processed in such a way that the self-adhesive AmbienTone No. 2 can be attached to the back of the panel, with the front of the panel being used as a flat membrane. This enables the AmbienTone No. 2 flat-panel speaker to be invisibly and seamlessly integrated into wood paneling, furnishings, etc.

€1,404.20*
AmbienTone R1
Shelf | Built-in | Wall-mounted speakers
The AmbienTone R1 is a high-quality 2-way built-in loudspeaker for simple wall or ceiling mounting. The loudspeakers can be installed in kitchens, health spa areas, bathrooms, living rooms and dining rooms as well as in public buildings such as stores, restaurants or galleries. The possible applications range from discreet background music to home cinema and multi-room applications right through to high-quality stereo playback.

€110.00*
Skirting board
Skirting board | Skirting duct
Length: 1800 mm | PU: Set of 5
The AmbienTrack skirting board replaces the usual skirting board. It is used to lay the cables horizontally in the room and to connect the AmbienTrack wall and corner pillars and the device supports. It can be mounted on the wall or flush with the surface. Electrical installation system compliant with EN 50085

Variants from €90.44*
€330.82*
Outside corner skirting board
Molded parts

€38.66*