Product information "Skirting board"

The AmbienTrack skirting board replaces the usual skirting board. It is used to lay the cables horizontally in the room and to connect the AmbienTrack wall and corner pillars and the device supports. It can be mounted on the wall or flush with the surface. Electrical installation system compliant with EN 50085

Application: High-quality cable trunking system
Basic profile: Environmentally friendly PVC regenerate
Conformity: Tested according to DIN EN 50085-2-1
Cover: Natural anodized aluminum (E6EV1)
LED lighting: Optional in shadow gap (light line)
Length: 1800 mm
Product group: AmbienTech
Product category: Cable duct
Made in Germany: Yes
  • Basic profile
  • Cover
  • Installation instructions

0 of 0 reviews

Leave a review!

Share your experiences with others.

You might also be interested in this:

Skirting board duct
Skirting board | Skirting duct
Length: 1875 mm
The AmbienTrack skirting board duct is mounted on the floor and is used for horizontal cable routing and for installing components close to the floor. On plasterboard walls, it is possible to partially integrate the skirting board duct into the wall. It has two shadow gaps that can be backlit with AmbienArt LED strips. Electrical installation system compliant with EN 50085

Variants from €110.67*
End section for skirting board
Molded parts
Model: Right

Outside corner skirting board
Molded parts

Cut-out: 55 x 55 mm | Length: 900 mm | Number of cut-outs: 5
The same aluminum covers are used for the basic profiles of the wall pillars, corner pillars, skirting ducts and flat wall pillars. There are two standard finishes (natural anodized and stainless steel). The covers are clipped onto the basic profiles without requiring screws. The covers are available with corresponding perforations for use with various installation products and light modules. A special design feature is the frameless installation of standard switch systems.

Variants from €51.75*
AmbienTone No.2
"Invisible" speaker
The AmbienTone No. 2 universal modules can be invisibly inserted into panel materials such as MDF wood or chipboard. Panel material (such as parts of a media wall or parts of wall or ceiling paneling) are processed in such a way that the self-adhesive AmbienTone No. 2 can be attached to the back of the panel, with the front of the panel being used as a flat membrane. This enables the AmbienTone No. 2 flat-panel speaker to be invisibly and seamlessly integrated into wood paneling, furnishings, etc.