High-end power strip

AC-2502-SF8

Quality: Referenz

€739.00*

Filter concept: Specially adapted filters eliminate high-frequency interference and noise from the power supply and prevent them from interacting with the high-precision audio signal.

More details: A stable power supply leads to greater resolution and fine detail.

Device protection: The power strip protects your connected devices from voltage peaks,

Master-slave concept: Individually switchable sockets allow you to switch individual devices on and off without turning off the entire power strip.

FAQs "HiFi cables”

Find a dealer

Questions about the product

Length

1.5 m

3 m

Find a dealer

Product number: 00716402

Product information "AC-2502-SF8"

The in-akustik power cables and power strips filter the mains supply and deliver "clean" power to your hi-fi system. The excellent materials and outstanding workmanship guarantee a maximum level of dynamism - even under extreme loads. Full shielding and special filters prevent the picking-up of radio frequencies that would turn the cable into an antenna. Massive busbars in the power strips distribute the power evenly to all outlets. In addition, the AC-2502-SF8 power strip's sockets are divided up into two groups. Group 1: The two gray sockets are directly and permanently connected to the mains supply. Power-hungry amplifiers, active subwoofers or other devices that should not be disconnected from the mains can be connected here. Group 2: The six black sockets can be disconnected from the mains supply via a switch. The additional mains filter makes this group particularly suitable for source devices such as CD players, preamplifiers, phono preamplifiers and other precision electronics.

Application:	High-end power strip
Childproof lock:	Yes
Conductor cross-section:	3 x 2.5 mm²
Conductor material:	High-purity copper
Conformity:	CE, REACH, RoHS
Filter:	In-plug filter, 2Y filter, 6 sockets incl. LC filter
Internal cabling:	8 mm² busbars
Jacket:	PE network jacket
Load capacity:	3680 W (230 V AC/16 A)
Mains switch:	Yes \| 6 sockets with all-pole mains disconnection
Number of sockets:	8
Phase marking:	Yes
Phase tester:	Included in the scope of delivery
Protection class:	1
Rated current:	16 A
Rated voltage:	250 V AC \| 50/60 Hz
Shielding:	Dense foil shield, Drain wire, Metal housing
Surge protection:	Yes \| With indicator lamp
Dimensions:	655 x 52 x 44 mm (L x W x H)
Product group:	Power supply
Product category:	Power strips
Quality:	Referenz
Made in Germany:	Yes

1 x Referenz power strip AC-2502-SF8 | 8 sockets
Phase tester

Company profile Declaration of conformity User manual

Compare product

Image

Name

AC-2502-SF8

AC-1502-P6

AC-2502-P8

Link

Rating

Description

The Referenz power strip has 6 sockets and filters undesirable interference from the power supply without additional transmission resistance. Thanks to the use of high-quality materials and excellent workmanship, it offers a maximum level of dynamism, even under extreme loads. Thanks to the full shielding and special filters, it prevents interference from radio frequencies. Power is distributed evenly to all outlets via solid busbars in the power strip.

The Referenz power strip filters undesirable interference from the power supply without additional transmission resistance. Thanks to the use of high-quality materials and excellent workmanship, it offers a maximum level of dynamism, even for extreme loads. The full shielding and special filters prevents interference from radio frequencies. Power is distributed evenly to all outlets via solid busbars in the power strip.

Price

€739.00*

€449.00*

€548.99*

Application

High-end power strip

Childproof lock

Yes

Conductor cross-section

3 x 2.5 mm²

3 x 1.5 mm²

3 x 2.5 mm²

Conductor material

High-purity copper

High-purity OFC copper

High-purity copper

Conformity

CE; REACH; RoHS

Filter

In-plug filter; 2Y filter; 6 sockets incl. LC filter

In-plug filter; 2Y filter

Internal cabling

8 mm² busbars

Jacket

PE network jacket

Load capacity

3680 W (230 V AC/16 A)

Mains switch

Yes | 6 sockets with all-pole mains disconnection

Number of sockets

Phase marking

Yes

Phase tester

Included in the scope of delivery

Protection class

Rated current

16 A

Rated voltage

250 V AC | 50/60 Hz

Shielding

Dense foil shield; Drain wire; Metal housing

Surge protection

Yes | With indicator lamp

Dimensions

655 x 52 x 44 mm (L x W x H)

352 x 52 x 44 mm (L x W x H)

435 x 52 x 44 mm (L x W x H)

Product group

Power supply

Product category

Power strips

Quality

Referenz

Made in Germany

Yes

0 of 0 reviews

Leave a review!

Share your experiences with others.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

You might also be interested in this:

AC-3502 | SCHUKO

High-end power filters Quality: Referenz Highly effective parallel filter

Model: Black | Connector: SCHUKO

The Referenz AC-3502 Power Station reliably suppresses undesirable interference from the power grid. At the core of the power distributor is a highly efficient parallel filter, finely tuned to audiophile requirements, which effectively dissipates annoying interference both from the mains power and from the connected devices themselves without restricting the energy supply. The star-shaped distribution also ensures a homogeneous supply to all connected components. The Referenz AC-3502 Power Station is a central pillar in achieving a sound that is both refined and powerful. The technology sits in a solid metal housing with a brushed black anodized aluminum front. Six high-quality sockets are available at the rear. Thanks to the central high-current mains connection socket (IEC C20), the power cable can be easily replaced if necessary, with a longer cable for example. Integrated surge protection safeguards the connected devices from everyday voltage peaks, and the sockets can be conveniently switched on and off using the "Power" button on the front panel

€1,499.00*

AC-4500 | SCHUKO

High-end power filters Quality: Referenz 2 filter types | DC suppression

Filter configuration: 1 x analog | Model: Natural aluminum

Where does fine sound begin? Where does it end? These questions ring constantly in our ears. The truth is, various factors have a major impact on the sound quality produced by audio systems, and one of these factors is power supply. It is subject to fluctuations that vary depending on the location of your home (in a city or a rural environment). If we look at things from a purely physics perspective, the music produced by a loudspeaker is ultimately nothing more than domestic current converted into sound. This statement sounds almost too banal compared to the hi-fi jargon we are all accustomed to. Unfortunately, all too often we ignore where the sound actually comes from and the importance of having a stable power supply. A “clean” current is the raw material of fine sound, and our AC-4500 Power Station makes sure that this is what you get. The AC-4500 Power Station is available in several versions – from a basic model with one filter for all six sockets through to the top model that comes equipped with six separate filters, one for each socket. The models differ not only in the number of filters they are equipped with, but also in the combination of filter types they provide – type I (for analog devices) and type II (for digital devices). The AC-4500 Power Station was developed completely in-house, and each unit is manufactured in the company’s own facility. Units subsequently undergoes rigorous testing with documentation of the results. Because safety is paramount for this type of unit, we have also arranged for an accredited laboratory to verify CE/CB conformity. The Power Station’s sensitive technology is protected by a robust metal housing made of 2 mm-thick galvanized sheet steel. It has an elegant front panel made of brushed aluminum. The interior of the housing is designed so that the socket groups are shielded from one another, and any interference stemming from the connected devices is unable to propagate. Click here and discover the exciting details

€3,999.00*

AC-2502

High-end mains power cable Quality: Referenz 3 x 2.5 mm² | Dense foil shield

Length: 1.5 m | Connector: SCHUKO> C19

A hi-fi system basically reproduces nothing other than modulated household electricity. Consequently, it should arrive at devices with as little inhibition as possible. The big challenge for power supply cables is extreme current peaks. These are caused by the connected devices themselves converting alternating current into direct current. Such extreme current peaks cause a whole range of undesirable effects, which is why the power cable is of particular importance. The Referenz AC-2502 mains cable is equipped to deal with this demanding task, and is specially designed for connecting up high-quality hi-fi and high-end audio systems. Its features include 3.3 times the normative minimum conductor cross-section and shielding to protect the sensitive audiophile components in the chain from the interference fields caused by the current peaks. Safety comes first: However much we focus on high-end sound, safety plays a particularly important role in this cable category. That’s why every AC-2502 undergoes an insulation and high-voltage test in addition to the standard function test. The results are documented, and each cable is given an individual serial number.

Variants from €329.00*

€339.00*

New

AC-1205 AIR | Schuko - C19 | Basic

High-end mains power cable Quality: Referenz AIR Helix Point-to-Point | Multicore

Length: 3 m | Connector: SCHUKO> C19

Soundscapes are created by the dynamics in the music. To exploit the full potential of your high-end audio components, you need a reliable power pipeline that provides your components with the power peaks with as little delay and loss as possible. This is where the AC-1205 AIR mains connection cable comes into play. Our innovative AIR technology has already caused a sensation in the high-end scene and now also forms the architectural basis for the AC-1205 AIR mains cable. Using specially developed clips, the individual conductors are held at fixed distances and insulated from each other by an "air dielectric". This reduces both capacitive and inductive interference and ensures a smooth flow of energy. The multicore design of the AC-1205 AIR neutralizes the magnetic interference and magnetic fields generated by current peaks and minimizes the line inductance. In addition, the large number of individual wires reduces the skin effect that occurs at high frequencies. Splitting the current across many cores not only increases the usable conductor cross-section, but also increases the overall cross-section of the cable. The result is a reliable power supply, even in the most demanding passages, which allows your sound system to develop its full potential. To minimize electromagnetic interference fields, the AIR cables are shielded with a dense braid of tinned copper. This not only protects your audio components, but also neighboring cables from unwanted interference caused by the high current peaks in the power cable. The in-akustik High End AC-1205 AIR mains cable is an outstanding energy pipeline for perfect audiophile sounds. It eliminates unwanted effects and makes a not insignificant contribution to the most authentic music reproduction possible. Click here and discover the exciting details

Variants from €989.00*

€1,569.00*

High-end power strip

AC-2502-SF8

Quality: Referenz

Login

in-akustik Newsletter