Go to homepage
€0.00*

Molded parts

Strain relief for Tool Box

AmbienTech

€1.44*

Prices incl. VAT plus shipping costs

Strain relief (M5861)
For mounting in conjunction with the Tool Box
Questions about the product

Available, delivery time: 1-3 working days

Piece
Product number: 00190003
Product information "Strain relief for Tool Box"
Product group: AmbienTech
Product category: Cable duct
Made in Germany: Yes
  • Strain relief for Tool Box

0 of 0 reviews

Leave a review!

Share your experiences with others.

You might also be interested in this:

Tool Box Tool Box
Tool Box
Cut-out: 65 x 65 mm | Number of cut-outs: 4
Installation components such as switches, sockets, computer and multimedia connections, sensors and control elements can be installed in the AmbienTrack Tool Box in any desired combination: whether in the wall pillars, corner pillars or skirting ducts. In addition to this, the Tool Box can also be used as a distributor or junction box, and for installing electronic assemblies if required. The Tool Box is available in combinations of 1 to 5 units. Electrical installation system compliant with EN 50085.

Variants from €6.18*
€18.08*
Skirting board duct Skirting board duct
Skirting board duct
Skirting board | Skirting duct
Length: 1875 mm
The AmbienTrack skirting board duct is mounted on the floor and is used for horizontal cable routing and for installing components close to the floor. On plasterboard walls, it is possible to partially integrate the skirting board duct into the wall. It has two shadow gaps that can be backlit with AmbienArt LED strips. Electrical installation system compliant with EN 50085

Variants from €110.67*
€228.48*
Skirting board Skirting board
Skirting board
Skirting board | Skirting duct
Length: 1800 mm | PU: 1 pc.
The AmbienTrack skirting board replaces the usual skirting board. It is used to lay the cables horizontally in the room and to connect the AmbienTrack wall and corner pillars and the device supports. It can be mounted on the wall or flush with the surface. Electrical installation system compliant with EN 50085

€90.44*
Cover Cover
Cover
Cut-out: 71 x 71 mm | Length: 900 mm | Number of cut-outs: 5
The same aluminum covers are used for the basic profiles of the wall pillars, corner pillars, skirting ducts and flat wall pillars. There are two standard finishes (natural anodized and stainless steel). The covers are clipped onto the basic profiles without requiring screws. The covers are available with corresponding perforations for use with various installation products and light modules. A special design feature is the frameless installation of standard switch systems.

Variants from €51.75*
€69.02*