Product information "LS-4005 AIR Pure Silver | BiWire Jumper"

To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable.

To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper.

BFA & Spade 360° (LS-4005 AIR & LS-2405 AIR): Movement across three axes make the 360-degree BFA and spade connectors really easy to connect and disconnect. Difficult set-up operations that put a strain on both cables and devices are a thing of the past. The connectors can easily be attached to terminals from a wide range of manufacturers. No awkward bending is necessary, avoiding damage to surfaces and potential contact resistance. Set-up is fast and problem-free. The attractively designed connectors are the perfect complement to the outstanding sound. The new connectors are used with the LS-4005 and the LS-2405. Both connector versions as well as the Basic version for the LS-1205 are pressure-grouted with a force of 1.5 tonnes.

Application: High-end bi-wire jumper
Cable diameter: 14 mm
Conductor cross-section: 4 x 9,6 mm² (4 x 8 x 1,2 mm²)
Conductor design: Cross Link Super Speed waveguide
Conductor material: High-purity silver
Conformity: CE, REACH, RoHS
Connector assembly: Pressure-grouted contacts (1.5 tonnes)
Connector housing: Solid metal
Contact enhancement: Rhodium-coated
Contact material: Beryllium Copper (BFA Banana), Tellurium copper (cable lug)
Design: 16-fold double layer multicore
Dielectric: Air
Fork width: Stepped 6/8 mm
Jacket: PE network jacket
Length: 180 mm
Product group: Loudspeaker cables
Product category: Speaker cable accessories
Quality: Referenz
Technology: AIR Helix Point-to-Point Multicore
Connector: Banana Cable lug
Connector highlight: BFA Banana 360° Spring-loaded contact fork Spade lug 360°
Made in Germany: Yes
  • Set of 4 LS-4005 AIR Pure Silver BiWire Jumpers
  • Allen key for changing the connectors
  • Quality certificate
  • Warranty card
  • CD "Der Anlagenberater"
  • Universal user manual
Compare product
Image
in-akustik Reference LS-4005 Air Pure Silver Bridge
in-akustik Reference LS-1205 Air Pure Silver Speaker Cable
in-akustik Reference LS-2405 Air Pure Silver Speaker Cable
Name
LS-4005 AIR Pure Silver | BiWire Jumper
LS-1205 AIR Pure Silver | BiWire Jumper
LS-2405 AIR Pure Silver | BiWire Jumper
Rating
Description

To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable.

To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper.

BFA & Spade 360° (LS-4005 AIR & LS-2405 AIR): Movement across three axes make the 360-degree BFA and spade connectors really easy to connect and disconnect. Difficult set-up operations that put a strain on both cables and devices are a thing of the past. The connectors can easily be attached to terminals from a wide range of manufacturers. No awkward bending is necessary, avoiding damage to surfaces and potential contact resistance. Set-up is fast and problem-free. The attractively designed connectors are the perfect complement to the outstanding sound. The new connectors are used with the LS-4005 and the LS-2405. Both connector versions as well as the Basic version for the LS-1205 are pressure-grouted with a force of 1.5 tonnes.

To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable.

To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper.

To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable.

To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper.

BFA & Spade 360° (LS-4005 AIR & LS-2405 AIR): Movement across three axes make the 360-degree BFA and spade connectors really easy to connect and disconnect. Difficult set-up operations that put a strain on both cables and devices are a thing of the past. The connectors can easily be attached to terminals from a wide range of manufacturers. No awkward bending is necessary, avoiding damage to surfaces and potential contact resistance. Set-up is fast and problem-free. The attractively designed connectors are the perfect complement to the outstanding sound. The new connectors are used with the LS-4005 and the LS-2405. Both connector versions as well as the Basic version for the LS-1205 are pressure-grouted with a force of 1.5 tonnes.

Price

€2,699.00*

€1,149.00*

€1,849.00*

Application
High-end bi-wire jumper
High-end bi-wire jumper
High-end bi-wire jumper
Cable diameter
14 mm
7,5 mm
10 mm
Conductor cross-section
4 x 9,6 mm² (4 x 8 x 1,2 mm²)
2 x 2.4 mm² (4 x 1.2 mm²)
2 x 4.8 mm² (8 x 1.2 mm²)
Conductor design
Cross Link Super Speed waveguide
Cross Link Super Speed waveguide
Cross Link Super Speed waveguide
Conductor material
High-purity silver
High-purity silver
High-purity silver
Conformity
CE; REACH; RoHS
CE; REACH; RoHS
CE; REACH; RoHS
Connector assembly
Pressure-grouted contacts (1.5 tonnes)
Pressure-grouted contacts (1.5 tonnes)
Pressure-grouted contacts (1.5 tonnes)
Connector housing
Solid metal
Solid metal
Solid metal
Contact enhancement
Rhodium-coated
Rhodium-coated
Rhodium-coated
Contact material
Beryllium Copper (BFA Banana); Tellurium copper (cable lug)
Beryllium Copper (BFA Banana); Tellurium copper (cable lug)
Beryllium Copper (BFA Banana); Tellurium copper (cable lug)
Design
16-fold double layer multicore
4-fold multicore
8-fold double layer multicore
Dielectric
Air
Air
Air
Fork width
Stepped 6/8 mm
Stepped 6/8 mm
Stepped 6/8 mm
Jacket
PE network jacket
PE network jacket
PE network jacket
Length
180 mm
120 mm
150 mm
Product group
Loudspeaker cables
Loudspeaker cables
Loudspeaker cables
Product category
Speaker cable accessories
Speaker cable accessories
Speaker cable accessories
Quality
Referenz
Referenz
Referenz
Technology
AIR Helix Point-to-Point; Multicore
AIR Helix Point-to-Point; Multicore
AIR Helix Point-to-Point; Multicore
Connector
Banana; Cable lug
Banana; Cable lug
Banana; Cable lug
Connector highlight
BFA Banana 360°; Spring-loaded contact fork; Spade lug 360°
-
BFA Banana 360°; Spring-loaded contact fork; Spade lug 360°
Made in Germany
Yes
Yes
Yes

0 of 0 reviews

Leave a review!

Share your experiences with others.


You might also be interested in this:

LS-4005 AIR Pure Silver
High-end speaker cable Quality: Referenz AIR Helix Point-to-Point | Multicore | Pure Silver
Connection type: SW | Length: 3 m | Connector: BFA & Spade
AIR technology is a milestone in our more than 46-year company history and is causing a sensation in the hi-fi industry worldwide. The approach itself sounds relatively banal: The physically induced losses must be minimized in order to transmit the original music signal as authentically and neutrally as possible. And, thanks to the AIR technology, loss-free transmission is closer than ever before. It leads to a significantly better reproduction, which is not only subjectively audible, but also objectively measurable. The insulation (or dielectric) of the AIR cables is practically perfect thanks to the air insulation, and hardly affects the sound at all. The structure, dimensions and arrangement of the conductors are optimized, and approach the limits of what is physically possible. Adding another highlight to this perfect audiophile foundation, we then focused on the conductor material of the cables. Copper in the appropriate purity is already a very good conductor. A superconductor, where electrical resistance is zero, would be perfect, of course. Unfortunately, superconducting materials require temperatures of at least -70 degrees. Under realistic operating conditions, the best conducting material we have is currently silver. At 61.35 S/m (Siemens pro Meter), its conductivity is approximately six percent superior to that of copper. However, this precious metal is about 100 times more expensive. Below you can learn more about the outstanding technical features of this cable, the innovations in the 5th generation and the physical principles used in the AIR technology. Click here and discover the exciting details

Variants from €23,899.00*
€35,499.00*
LS-2405 AIR Pure Silver
High-end speaker cable Quality: Referenz AIR Helix Point-to-Point | Multicore | Pure Silver
Connection type: SW | Length: 3 m | Connector: BFA & Spade
AIR technology is a milestone in our more than 46-year company history and is causing a sensation in the hi-fi industry worldwide. The approach itself sounds relatively banal: The physically induced losses must be minimized in order to transmit the original music signal as authentically and neutrally as possible. And, thanks to the AIR technology, loss-free transmission is closer than ever before. It leads to a significantly better reproduction, which is not only subjectively audible, but also objectively measurable. The insulation (or dielectric) of the AIR cables is practically perfect thanks to the air insulation, and hardly affects the sound at all. The structure, dimensions and arrangement of the conductors are optimized, and approach the limits of what is physically possible. Adding another highlight to this perfect audiophile foundation, we then focused on the conductor material of the cables. Copper in the appropriate purity is already a very good conductor. A superconductor, where electrical resistance is zero, would be perfect, of course. Unfortunately, superconducting materials require temperatures of at least -70 degrees. Under realistic operating conditions, the best conducting material we have is currently silver. At 61.35 S/m (Siemens pro Meter), its conductivity is approximately six percent superior to that of copper. However, this precious metal is about 100 times more expensive. Below you can learn more about the outstanding technical features of this cable, the innovations in the 5th generation and the physical principles used in the AIR technology. Click here and discover the exciting details

Variants from €14,499.00*
€21,499.00*
New
Cable Base - 4005
High End Cable Base Quality: Referenz Cable diameter: 45 mm
PU: Set of 6
High-end and hi-fi systems are a combination of high-precision and intricately made devices. Perfectly attuned to each other, they allow music to be played back in outstanding quality. To ensure that all components can function flawlessly, they need to be kept free of interference to the greatest extent possible, just like high precision measuring equipment does. The same also applies for the connection cables. Interference is caused in a number of different ways. Along with typical electromagnetic interference, which can, for example, be minimised by using good shielding, mechanical vibrations and shocks also have an impact on the playback quality. Added to this are the effects of capacitive coupling between conductors and floors, which affect loudspeakers cables in particular. The conductors form unwanted capacitance, not just in interplay with each other, but also with other surfaces in the immediate surroundings. A good way to counteract this is by increasing the distance to the surfaces. As a rule, a few centimetres suffice. Vibrations are caused in different ways and they can be transmitted by structure-borne and air-borne noise. Structure-borne noise refers to vibrations that are exhibited by a body, such as the housing of a device. An example of this is the loudspeaker box. The membranes of the speakers are stimulated, making them vibrate. However, as the membranes feature a mechanical connection with the loudspeaker housing, they also transfer vibrations to the housing. The vibrations will be stronger or weaker according to the housing weight and the insulation. The vibrations are also transferred to the surface on which the loudspeakers are placed, this being the floor. Two things now occur. On the one hand, the floor emits some of the structure-borne energy as airborne sound (resulting in the typical droning noise), while on the other hand, the structure-borne noise is transferred, for example, to the cable placed on the floor. More about the effects of this later on. Airborne sound refers to vibrations that are transferred through the air and that are audible for humans (with the exception of infrasound and ultrasound). The primary purpose of a hi-fi system is to produce sound. However, airborne noise not only stimulates the eardrum, but also acts on all other surfaces it reaches. This causes the walls, floors and other surfaces, and ultimately the hi-fi components and cables, to vibrate as well. The combination of airborne and structure-borne noise not only causes glasses in a display case to vibrate mechanically, but all components, including the cable used for a hi-fi signal chain, as well. Experiments have shown that the sound from the components and from the cables is impaired by the vibrations. One reason for this is, for example, the capacity values of components in relation to each other, which constantly change due to the vibrations. In order to minimise these so-called microphonic effects, the components must be isolated from the surface on which they are placed. This can be done by using the Reference High Tech Gel Absorber, for example, for appliances and loudspeakers. Their core contains a special gel, which physically converts the vibrations into heat. The Reference Cable Bases have been developed specifically for cables. Their base also contains a special gel, along with natural rubber strips, in which the cables can float freely. Along with absorbing the vibrations, the Reference Cable Bases also keep the cables at a distance to the floor. This reduces unwanted capacitances and reduces the effects on the electronics.

€799.00*
New
LS-2405 AIR Pure Silver | BiWire Jumper
High End BiWire Jumper Quality: Referenz AIR Helix Point-to-Point | Multicore | Pure Silver
Length: 150 mm | Connector: Banana < > Kabelschuh
To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable. To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper. BFA & Spade 360° (LS-4005 AIR & LS-2405 AIR): Movement across three axes make the 360-degree BFA and spade connectors really easy to connect and disconnect. Difficult set-up operations that put a strain on both cables and devices are a thing of the past. The connectors can easily be attached to terminals from a wide range of manufacturers. No awkward bending is necessary, avoiding damage to surfaces and potential contact resistance. Set-up is fast and problem-free. The attractively designed connectors are the perfect complement to the outstanding sound. The new connectors are used with the LS-4005 and the LS-2405. Both connector versions as well as the Basic version for the LS-1205 are pressure-grouted with a force of 1.5 tonnes.

€1,849.00*
New
LS-1205 AIR Pure Silver | BiWire Jumper
High End BiWire Jumper Quality: Referenz AIR Helix Point-to-Point | Multicore | Pure Silver
Length: 120 mm | Connector: Banana < > Kabelschuh
To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable. To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper.

€1,149.00*
Burmester Selection
Brand Compilation Pop International
Format: LP Audiophil
With this exquisite selection of carefully picked musical pieces we have once again dedicated ourselves to the experience of true emotions. In cooperation with Burmester and Pauler Acoustics we have created a musically and sonically exceptional compilation supposed to give you pure audio enjoyment. We wish you a pleasant time while listening and dreaming. • DMM direct cut • 180 gr Audiophile Pressing • 45 R.P.M.

Variants from €24.99*
€42.99*