€548.99*
The Referenz power strip filters undesirable interference from the power supply without additional transmission resistance. Thanks to the use of high-quality materials and excellent workmanship, it offers a maximum level of dynamism, even for extreme loads. The full shielding and special filters prevents interference from radio frequencies. Power is distributed evenly to all outlets via solid busbars in the power strip.
| Application: | High-end power strip |
|---|---|
| Childproof lock: | Yes |
| Conductor cross-section: | 3 x 2.5 mm² |
| Conductor material: | High-purity copper |
| Conformity: | CE, REACH, RoHS |
| Filter: | In-plug filter, 2Y filter |
| Internal cabling: | 8 mm² busbars |
| Jacket: | PE network jacket |
| Length: | 1.5 m, 3 m |
| Load capacity: | 3680 W (230 V AC/16 A) |
| Number of sockets: | 8 |
| Phase marking: | Yes |
| Phase tester: | Included in the scope of delivery |
| Protection class: | 1 |
| Rated current: | 16 A |
| Rated voltage: | 250 V AC | 50/60 Hz |
| Shielding: | Dense foil shield, Drain wire, Metal housing |
| Dimensions: | 435 x 52 x 44 mm (L x W x H) |
| in-akustik product group: | Power supply |
| in-akustik category: | Power strips |
| Quality: | Referenz |
| Connector: | SCHUKO |
| Made in Germany: | Yes |
- 1 x Referenz power strip AC-2502-P8 | 8 sockets
- Phase tester
If you have any questions about product safety, please contact:
in-akustik GmbH & Co. KG
Untermatten 12-14
79282 Ballrechten-Dottingen
Germany
Tel.: +49 (0) 7634 5610-0
E-Mail: service@in-akustik.de
The Referenz power strip filters undesirable interference from the power supply without additional transmission resistance. Thanks to the use of high-quality materials and excellent workmanship, it offers a maximum level of dynamism, even for extreme loads. The full shielding and special filters prevents interference from radio frequencies. Power is distributed evenly to all outlets via solid busbars in the power strip.
The Referenz power strip has 6 sockets and filters undesirable interference from the power supply without additional transmission resistance. Thanks to the use of high-quality materials and excellent workmanship, it offers a maximum level of dynamism, even under extreme loads. Thanks to the full shielding and special filters, it prevents interference from radio frequencies. Power is distributed evenly to all outlets via solid busbars in the power strip.
The in-akustik power cables and power strips filter the mains supply and deliver "clean" power to your hi-fi system. The excellent materials and outstanding workmanship guarantee a maximum level of dynamism - even under extreme loads. Full shielding and special filters prevent the picking-up of radio frequencies that would turn the cable into an antenna. Massive busbars in the power strips distribute the power evenly to all outlets. In addition, the AC-2502-SF8 power strip's sockets are divided up into two groups. Group 1: The two gray sockets are directly and permanently connected to the mains supply. Power-hungry amplifiers, active subwoofers or other devices that should not be disconnected from the mains can be connected here. Group 2: The six black sockets can be disconnected from the mains supply via a switch. The additional mains filter makes this group particularly suitable for source devices such as CD players, preamplifiers, phono preamplifiers and other precision electronics.
Excellent sound starts with the power supply – and this is exactly where the AC-3200 power strip with integrated DC blocker comes in. It filters disturbing direct current components (DC offset) from the power grid, ensuring a symmetrical voltage supply. Ring core transformers benefit especially from this: humming noises are effectively prevented, efficiency increases, and distortion decreases. The DC blocker technology also protects the transformers from magnetic saturation – a condition that not only causes noise but also costs power and can impair sound quality.
The AC-3200 was fully developed in-house – from the initial concept through prototypes to the finished product. It is manufactured in our own workshop. Inside, massive copper busbars and high-quality sockets ensure stable conductivity and reliable power distribution. The brushed aluminum housing protects the technology and represents durable quality. An integrated surge protector provides additional safety for your hi-fi components.
Each AC-3200 is individually tested – with CE-compliant high-current protective conductor testing and high-voltage insulation measurement. This ensures that every power strip meets the highest technical standards – for reliable operation and long-lasting sound quality.
Note on the variants: The AC-3200 DC blocker is available in three versions: DC-15, DC-30, and DC-45. All three versions are designed for a maximum socket power of 3680 watts. For medium and large high-end systems where more punch and dynamics are required, we recommend the DC-30 or DC-45 variants with two or three times the capacity. This provides the right solution for every setup – from compact systems to powerful hi-fi systems.
€548.99*
€449.00*
€739.00*
€1,999.00*
Login
You might also be interested in this:
