Product information "LS-1205 AIR Pure Silver | BiWire Jumper"

To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable.

To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper.

Application: High-end bi-wire jumper
Cable diameter: 7,5 mm
Conductor cross-section: 2 x 2.4 mm² (4 x 1.2 mm²)
Conductor design: Cross Link Super Speed waveguide
Conductor material: High-purity silver
Conformity: CE, REACH, RoHS
Connector assembly: Pressure-grouted contacts (1.5 tonnes)
Connector housing: Solid metal
Contact enhancement: Rhodium-coated
Contact material: Beryllium Copper (BFA Banana), Tellurium copper (cable lug)
Design: 4-fold multicore
Dielectric: Air
Fork width: Stepped 6/8 mm
Jacket: PE network jacket
Length: 120 mm
Product group: Loudspeaker cables
Product category: Speaker cable accessories
Quality: Referenz
Technology: AIR Helix Point-to-Point Multicore
Connector: Banana Cable lug
Made in Germany: Yes
  • LS-1205 AIR Pure Silver BiWire Jumpers | Set of 4
  • Quality certificate
  • Warranty card
  • CD "Der Anlagenberater"
  • Universal user manual

If you have any questions about product safety, please contact:
in-akustik GmbH & Co. KG
Untermatten 12-14
79282 Ballrechten-Dottingen
Germany
Tel.: +49 (0) 7634 5610-0
E-Mail: service@in-akustik.de

Compare product
Image
in-akustik Reference LS-1205 Air Pure Silver Speaker Cable
in-akustik Reference LS-2405 Air Pure Silver Speaker Cable
in-akustik Reference LS-4005 Air Pure Silver Bridge
Name
LS-1205 AIR Pure Silver | BiWire Jumper
LS-2405 AIR Pure Silver | BiWire Jumper
LS-4005 AIR Pure Silver | BiWire Jumper
Rating
Description

To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable.

To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper.

To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable.

To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper.

BFA & Spade 360° (LS-4005 AIR & LS-2405 AIR): Movement across three axes make the 360-degree BFA and spade connectors really easy to connect and disconnect. Difficult set-up operations that put a strain on both cables and devices are a thing of the past. The connectors can easily be attached to terminals from a wide range of manufacturers. No awkward bending is necessary, avoiding damage to surfaces and potential contact resistance. Set-up is fast and problem-free. The attractively designed connectors are the perfect complement to the outstanding sound. The new connectors are used with the LS-4005 and the LS-2405. Both connector versions as well as the Basic version for the LS-1205 are pressure-grouted with a force of 1.5 tonnes.

To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable.

To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper.

BFA & Spade 360° (LS-4005 AIR & LS-2405 AIR): Movement across three axes make the 360-degree BFA and spade connectors really easy to connect and disconnect. Difficult set-up operations that put a strain on both cables and devices are a thing of the past. The connectors can easily be attached to terminals from a wide range of manufacturers. No awkward bending is necessary, avoiding damage to surfaces and potential contact resistance. Set-up is fast and problem-free. The attractively designed connectors are the perfect complement to the outstanding sound. The new connectors are used with the LS-4005 and the LS-2405. Both connector versions as well as the Basic version for the LS-1205 are pressure-grouted with a force of 1.5 tonnes.

Price

€1,149.00*

€1,849.00*

€2,699.00*

Application
High-end bi-wire jumper
High-end bi-wire jumper
High-end bi-wire jumper
Cable diameter
7,5 mm
10 mm
14 mm
Conductor cross-section
2 x 2.4 mm² (4 x 1.2 mm²)
2 x 4.8 mm² (8 x 1.2 mm²)
4 x 9,6 mm² (4 x 8 x 1,2 mm²)
Conductor design
Cross Link Super Speed waveguide
Cross Link Super Speed waveguide
Cross Link Super Speed waveguide
Conductor material
High-purity silver
High-purity silver
High-purity silver
Conformity
CE; REACH; RoHS
CE; REACH; RoHS
CE; REACH; RoHS
Connector assembly
Pressure-grouted contacts (1.5 tonnes)
Pressure-grouted contacts (1.5 tonnes)
Pressure-grouted contacts (1.5 tonnes)
Connector housing
Solid metal
Solid metal
Solid metal
Contact enhancement
Rhodium-coated
Rhodium-coated
Rhodium-coated
Contact material
Beryllium Copper (BFA Banana); Tellurium copper (cable lug)
Beryllium Copper (BFA Banana); Tellurium copper (cable lug)
Beryllium Copper (BFA Banana); Tellurium copper (cable lug)
Design
4-fold multicore
8-fold double layer multicore
16-fold double layer multicore
Dielectric
Air
Air
Air
Fork width
Stepped 6/8 mm
Stepped 6/8 mm
Stepped 6/8 mm
Jacket
PE network jacket
PE network jacket
PE network jacket
Length
120 mm
150 mm
180 mm
Product group
Loudspeaker cables
Loudspeaker cables
Loudspeaker cables
Product category
Speaker cable accessories
Speaker cable accessories
Speaker cable accessories
Quality
Referenz
Referenz
Referenz
Technology
AIR Helix Point-to-Point; Multicore
AIR Helix Point-to-Point; Multicore
AIR Helix Point-to-Point; Multicore
Connector
Banana; Cable lug
Banana; Cable lug
Banana; Cable lug
Made in Germany
Yes
Yes
Yes
Connector highlight
-
BFA Banana 360°; Spring-loaded contact fork; Spade lug 360°
BFA Banana 360°; Spring-loaded contact fork; Spade lug 360°

0 of 0 reviews

Leave a review!

Share your experiences with others.


You might also be interested in this:

LS-1205 AIR Pure Silver
High-end speaker cable Quality: Referenz AIR Helix Point-to-Point | Multicore | Pure Silver
Connection type: SW | Length: 3 m | Connector: Cable lug
Experts have already been impressed by the LS-1204 AIR (copper). This is how AUDIO summed it up: "A stroke of genius that shows competitors how it should be done – in terms of sound, too. This was wonderfully dynamic, with the most fabulous drive reaching the speaker cones. Admittedly, the price is not low, but the acoustic yield is truly world class. What's more, everything was made by hand. You can feel the love for the product." With the LS-1205 AIR Pure Silver, the currently most filigree model in AIR technology is now also available as a pure silver cable. The structure, dimensions and conductor arrangement of this cable correspond to the copper version of the LS-1205 AIR. As with the LS-4005 AIR Pure Silver and LS-2405 AIR Pure Silver, the conductors have been optimized. Pure silver is used as the conductor material for the LS-1205 AIR Pure Silver too. Under realistic conditions, silver is currently the most conductive material. At 61.35 S/m (Siemens pro Meter), its conductivity is approximately six percent superior to that of copper. The electrons move 1.5 times faster than in a copper conductor! Click here and discover the exciting details

Variants from €8,499.00*
€12,499.00*
LS-2405 AIR Pure Silver
High-end speaker cable Quality: Referenz AIR Helix Point-to-Point | Multicore | Pure Silver
Connection type: SW | Length: 3 m | Connector: BFA & Spade
AIR technology is a milestone in our more than 46-year company history and is causing a sensation in the hi-fi industry worldwide. The approach itself sounds relatively banal: The physically induced losses must be minimized in order to transmit the original music signal as authentically and neutrally as possible. And, thanks to the AIR technology, loss-free transmission is closer than ever before. It leads to a significantly better reproduction, which is not only subjectively audible, but also objectively measurable. The insulation (or dielectric) of the AIR cables is practically perfect thanks to the air insulation, and hardly affects the sound at all. The structure, dimensions and arrangement of the conductors are optimized, and approach the limits of what is physically possible. Adding another highlight to this perfect audiophile foundation, we then focused on the conductor material of the cables. Copper in the appropriate purity is already a very good conductor. A superconductor, where electrical resistance is zero, would be perfect, of course. Unfortunately, superconducting materials require temperatures of at least -70 degrees. Under realistic operating conditions, the best conducting material we have is currently silver. At 61.35 S/m (Siemens pro Meter), its conductivity is approximately six percent superior to that of copper. However, this precious metal is about 100 times more expensive. Below you can learn more about the outstanding technical features of this cable, the innovations in the 5th generation and the physical principles used in the AIR technology. Click here and discover the exciting details

Variants from €14,499.00*
€21,499.00*
New
LS-2405 AIR Pure Silver | BiWire Jumper
High End BiWire Jumper Quality: Referenz AIR Helix Point-to-Point | Multicore | Pure Silver
Length: 150 mm | Connector: Banana < > Kabelschuh
To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable. To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper. BFA & Spade 360° (LS-4005 AIR & LS-2405 AIR): Movement across three axes make the 360-degree BFA and spade connectors really easy to connect and disconnect. Difficult set-up operations that put a strain on both cables and devices are a thing of the past. The connectors can easily be attached to terminals from a wide range of manufacturers. No awkward bending is necessary, avoiding damage to surfaces and potential contact resistance. Set-up is fast and problem-free. The attractively designed connectors are the perfect complement to the outstanding sound. The new connectors are used with the LS-4005 and the LS-2405. Both connector versions as well as the Basic version for the LS-1205 are pressure-grouted with a force of 1.5 tonnes.

€1,849.00*
New
LS-4005 AIR Pure Silver | BiWire Jumper
High End BiWire Jumper Quality: Referenz AIR Helix Point-to-Point | Multicore | Pure Silver
Length: 180 mm | Connector: Banana
To achieve the best possible sound, it is crucial that the amplifier has a firm grip on the speakers. In addition to activating the membranes to make them vibrate, it must also be able to dampen them effectively. One measure of this is the amplifier’s damping factor. The speakers’ actual damping factor is significantly influenced by the quality of the speaker cables and connecting bridges of the bi-wiring terminals. The original bridges often consist of simple stamped sheet metal parts of inferior quality. The new in-akustik AIR High End Bi-Wire Jumpers are based on the technologies, findings and materials of the renowned LS-1205 AIR, LS-2405 AIR and LS-4005 AIR speaker cables. If bi-wiring is not an option, these high-end bi-wire jumpers offer an excellent alternative to the often inferior metal bridges on the speaker terminals. They ensure an even and controlled signal distribution, which is perfectly harmonized with the respective speaker cable. To get closer to the pinnacle of audiophile perfection, we also carefully examined the conductor material. Copper in the right purity is itself already an excellent conductor, but a superconductor with no ohmic resistance to the current would be simply perfect. The material’s superconducting properties, however, require extremely low temperatures of at least -70 degrees. Under realistic conditions, silver is currently the most conductive material. With a conductivity of 61.35 S/m (siemens per meter), it outperforms copper by around six percent. Many manufacturers only use silver-plated conductors, which over time can seem, “bright”, “metallic” and even, “annoying”. We, on the other hand, use pure silver, which has a far more neutral sound. Due to the higher drift speed of the electrons, our pure silver cable delivers a more penetrating and sumptuous sound performance across all frequency ranges. On the other hand of course, silver is about one hundred times more expensive than copper. BFA & Spade 360° (LS-4005 AIR & LS-2405 AIR): Movement across three axes make the 360-degree BFA and spade connectors really easy to connect and disconnect. Difficult set-up operations that put a strain on both cables and devices are a thing of the past. The connectors can easily be attached to terminals from a wide range of manufacturers. No awkward bending is necessary, avoiding damage to surfaces and potential contact resistance. Set-up is fast and problem-free. The attractively designed connectors are the perfect complement to the outstanding sound. The new connectors are used with the LS-4005 and the LS-2405. Both connector versions as well as the Basic version for the LS-1205 are pressure-grouted with a force of 1.5 tonnes.

€2,699.00*
Great Voices, Vol. II
Reference Sound Edition Pop International
Format: LP Audiophil
Welcome to the world of impeccable sound, the IN-AKUSTIK REFERENCE SOUND EDITION – GREAT VOICES, VOL. II. This remarkable sound carrier from in-akustik has been assembled with a love of musical detail. 16 tracks featuring Great Voices are forming a seamless and exceptional sound and listening experience. RESO Mastering, the high definition mastering procedure, provides significant acoustic improvements in transparency, dynamics, bass reproduction and depth differentiation. The music is gaining more atmosphere and emotion. To best transmit this musical experience, the Direct Metal Mastercut (DMM) technique is employed and 180 gram pure Vinyl (Virgin Vinyl) is used for the sound carrier.

Variants from €24.99*
€42.99*
Great Guitar Tunes
Reference Sound Edition Pop International
Format: LP Audiophil
Welcome to the world of impeccable sound, the IN-AKUSTIK REFERENCE SOUND EDITION. This time the theme is: GREAT GUITAR TUNES. Excellent guitarists with exceptional performances are giving the ears a treat. This remarkable sound carrier from in-akustik has been assembled with a love of musical detail. 15 tracks featuring great musicians are forming a seamless and exceptional sound and listening experience. RESO Mastering, the high definition mastering procedure, provides significant acoustic improvements in transparency, dynamics, bass reproduction and depth differentiation. The music is gaining more atmosphere and emotion. To best transmit this musical experience, the Direct Metal Mastercut (DMM) technique is employed and 180 gram pure Vinyl (Virgin Vinyl) is used for the sound carrier.

Variants from €24.99*
€42.99*